Igbe Junction Solar Performance dị elu maka arụmọrụ kacha
Nkọwa
Atụmatụ na ngwa:
Ihe ahụ (tin mkpuchi ọla kọpa rịbọn) dabere na nha obosara * ọkpụrụkpụ: 1.5 * 0.2 mm (ọ nwekwara ike ịbụ 1.5-2.5mm * 0.08-0.25mm dị ka nhọrọ gị),
ire dị ka kwa nza, 2kgs / otutu.
Ọ bụrụ na ịchọrọ ịzụta ọtụtụ ma ọ bụ obere, pls kpọtụrụ anyị, anyị ga-edozi ọnụahịa na ụgwọ ibu maka gị.
Ihe gbasara PV busbar Ribbon
Ihe mejupụtara rịbọn PV bụ ọla kọpa na alloys mkpuchi, wee kewaa ya na rịbọn Tabbing Ribbon na Bus bar ribbon.
Ribbon Tabbing: ọ na-ejikọkarị akụkụ dị mma na nke adịghị mma nke sel n'usoro.
Ribbon mmanya ụgbọ ala: ọ na-etinye uche na eriri cell n'ime igbe njikọ yana ọwa ọkụ eletrik.
nkọwa
1) rịbọn ịgbado ọkụ maka nnukwu ike anyanwụ panel:
Isi ọla kọpa | eletriki Park ọla kọpa (TR line) na-atụgharị ma ọ bụ T2 ọla kọpa teepu slitting |
Ọla kọpa substrate resistivity | ρ ≤ 0.0172Ωmm2 / m |
Ihe mejupụtara solder | 62% Sn36% Pb2% Ag; 60% Sn40% Pb; 96.5% Sn3.5% Ag (Nhọrọ Bi) |
The ọkpụrụkpụ nke tin oyi akwa | 10μm-40μm, uwe akụkụ |
Ọkpụrụkpụ deviation | ≤ 0.008 |
Ngbanwe obosara | ngwaahịa akpọrepu ≤ 0.1mm; slitting Commodities ≤ 0.005mm |
Ogologo oge | ala dị nro ≥ 20%; steeti obere nro ≥ 15% |
Nkọwapụta | obosara 1.5mm-2.5mm; ọkpụrụkpụ 0.08mm-0.25mm. (nke a bụ 1.5 * 0.2 mm) |
Nkwakọ ngwaahịa | kaadiboodu, "M na-akpụzi" wheel, igbe |
Kwesịrị ekwesị maka DIY anyanwụ cell na anyanwụ panel, dịkwa mma maka igwe akpaka ịgbado ọkụ n'etiti enweghị decapitation; ihe ubi maka ndị ahịa L |
2) rịbọn ịgbado ọkụ maka epoxy anyanwụ panel wdg Obere anyanwụ panel:
Ọnọdụ Nchekwa na Ndụ Shelf
Ekwesịrị ịchekwa rịbọn ọla kọpa tinned n'ime ụlọ akọrọ na ikuku, ebe enweghị acid, alkail, ma ọ bụ gas na-emerụ ahụ na iru mmiri ime ụlọ ekwesịghị ịfe 60%. Debe ya n'ụzọ kwụ ọtọ ka ị na-akwakọba ma zere ebe a na-etinye katọn & ntinye kwụ ọtọ, ka ọ dị ugbu a, ọnụ ọgụgụ nke otu ngwaahịa anaghị agafe ọkwa ise ma ọ bụ 1 ton. Ndụ shelf nwere ike ruo ọnwa isii kemgbe ụbọchị mmepụta.